Expert Answers about Hyundai Santa Fe
- Trailer Hitch Recommendation for 2017 Hyundai Santa Fe Sport
- If the plan is to do any towing and there is a 2 inch hitch available that's the way to go. So for your 2017 Hyundai Santa Fe Sport the Curt hitch part # C13152 would be a great option and the best recommendation we can make.
For trailer wiring you'd then want the part # 118571.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop....
view full answer... - RV Thermometer and Weather Station Products
- We have a range of RV thermometers and weather station products shown on the linked page that provide temperature display and related information like humidity and forecasts but none of these is specifically intended for attachment to a window. For a cost-effective model that gives you both indoor and outdoor temps as well as a clock you might like the TempMinder Indoor and Outdoor Thermometer with Clock # MRI-122AG.
view full answer... - Trailer Hitch Recommendation for 2017 Hyundai Santa Fe
- If you stay under the 5,000 lb towing capacity of your 2017 Hyundai Santa Fe it will be just fine as that's what Hyundai determined to be a safe amount of weight to tow.
The Curt hitch part # C13153 would be a great option with more than enough capacity as well. It's a confirmed fit for your vehicle. For trailer wiring then you'd want the part # C56184 which is also a confirmed fit.
view full answer... - Availability of 13 Inch SIngle Axle Trailer Fender
- Yes, take a look at Fulton Single Axle Trailer Fender with Top and Side Steps # F008593. The fender is 9 inches wide, 12 inches tall and 40 inches long. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
I have included a video review of this fender for you to check out.
view full answer... - Thule Aero Roof Rack for 2017 Hyundai Santa Fe Sport with Panoramic Glass Roof
- If your 2017 Hyundai Santa Fe Sport with panoramic glass roof has an otherwise normal (bare) roof with no rails or fixtures you can use the Thule WingBar Evo roof rack made of parts # TH711400, # TH710501 and # TH145059.
view full answer... - Would a Hitch from a 2014 Hyundai Santa Fe Sport Fit a 2016 Model
- The Curt hitch part # C13152 that you referenced will also fit your 2016 Hyundai Santa Fe but you will need new install hardware since it is considered one time use. For that you will need part # RHK.
For trailer wiring you would want the part # C56332. If that is what you had on your 14 then it would also fit the 16 model.
view full answer... - Is a Trailer Jack or Lift Needed to Install Curt Hitch on 2017 Hyundai Santa Fe
- You can install the Curt hitch part # C13152 on a vehicle like your 2017 Hyundai Santa Fe without needing a jack or lift to raise the vehicle any higher. The vehicle has enough ground clearance to not require the added lift. We use a lift in our install videos as it makes it much easier to show the install process which is also the case in the install instructions link which I attached to this page.
view full answer... - Hardwired 4-Pole Trailer Wiring Kit for 2019 Hyundai Santa Fe Ultimate Without Tow Package
- In the 2019 Hyundai Santa Fe Ultimate without the tow package you can use Curt universal hardwire 4-pole kit # C59236. I confirmed compatibility with my tech contact at Curt. At the present time (March 2019) this is the only hardwire option confirmed for the vehicle.
Please refer to the linked review and installation videos for more details on operation and installation.
view full answer... - Wiring a 2010 Hyundai Santa Fe to Tow a Rockwood Camper Trailer with Electric Brakes
- Since your 2010 Hyundai Santa Fe has a factory 4-Way trailer wiring connector, it will be pretty simple to install a working 4-Way and 7-Way combination connector. We offer a kit, # ETBC7, that has this style of connector. You will need to hardwire the remaining wires that will supply power for trailer brakes, 12 volt power for trailer lighting or maintaining trailer battery charge, and reverse light signal.
We have detailed instructions, see link, that show how to connect these wires,...
view full answer... - Availability of Rear Suspension Enhancement for 2017 Hyundai Santa Fe
- I do have a possible solution for you, but unfortunately the 2017 and 2018 Hyundai Santa Fe models were designed in a way that does not allow for any kind of suspension enhancement or air bags. If you're looking to reduce sag while towing, I recommend using a weight distribution hitch.
In order to choose the correct weight distribution hitch you will need to know the loaded tongue weight of your trailer. This also includes the weight of anything behind the rear axle in your tow vehicle....
view full answer... - Bike Rack Needed for 2 Bikes and Rear Hatch Access on a 2018 Hyundai Santa Fe
- I do have a great solution for you but trunk mount bike racks like the Thule OutWay # TH45JV you referenced need to be removed when opening up the trunk or hatch of your vehicle because it adds a bit of extra weight and the racks are meant to only hold bikes in one orientation.
Although a roof rack and bike racks would eliminate the need to remove anything from behind your hatch we carry swinging hitch mount bike racks that allow you to gain full access to the rear of your 2018 Hyundai...
view full answer... - 2" Hitch Receiver Adapter For Raising The Receiver To Ensure That A Cargo Carrier Does Not Drag
- I have a couple options for you to consider for hauling a Cargo Carrier # CC-100 higher on your 2018 Hyundai Santa Fe.
First the Roadmaster High-Low Adapter # RM-048-6 can be used to raise your receiver height 6". This adapter will be limited to only 200lbs of tongue weight as it is designed for flat towing where there is generally no tongue weight. Since you would be using it with a cargo carrier its maximum rating of 400lbs drops 50%.
Next is the Replacement Shank for Gen-Y Adjustable...
view full answer... - Suspension Enhancement for 2017 Hyundai Santa Fe Limited
- The only suspension enhancement confirmed to fit your 2017 Hyundai Santa Fe Limited is the Coil SumoSprings Custom Helper Springs # CSS-1145R. These provide support to the coil springs on your vehicle. For air springs like the # F4155 you looked at, you may be able to use an Air Lift 1000 Universal Air Spring Kit like # AL60920.
Finding the correct kit will require taking some measurements. First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height...
view full answer... - Hitch Availability for 2004 Hyundai Santa Fe for Towing Rental Trailer
- We offer several medium-duty 2-inch Class III trailer hitch receivers for your 2004 Hyundai Santa Fe. All can be seen on the link at right, and I suggest the most cost-effective of the three, part # C13505 from Curt. Many customers do their hitch installation themselves, but most local auto repair or muffler shops will do the install for a modest fee. An installation video and the written instructions are linked also, along with two helpful articles concerning hitch installation.
I suggest...
view full answer... - How To Stabilize And Level A 2018 Hyundai Sante Fe When Pulling A Trailer
- I have a solution for you, but there are not any suspension enhancement systems available for your 2018 Hyundai Sante Fe. Instead, I recommend looking into a weight distribution hitch which is the recommended method for leveling your vehicle and trailer. A weight distribution hitch takes the weight of the trailer off the rear axle of the vehicle and applies it more evenly throughout the entire vehicle and trailer. This results in less rear sag on the tow vehicle along with improved handling...
view full answer... - Correct Wiring Kit for a 2020 Hyundai Santa Fe with the Factory Trailer Tow Package
- We have exactly what you need with the Curt T-Connector # CU94FR. This plugs right into the connector for the factory trailer tow package on your 2020 Hyundai Santa Fe and provides you with a 4-Way flat connector for basic trailer wiring. I have attached an installation video of this kit on a '19 Santa Fe that you can reference.
If you don't already have a trailer hitch, then I recommend the Draw-Tite # 75908 because it has a mounting bracket welded onto the crosstube which pairs nicely...
view full answer... - Dexter 3500-lb Beam Axle with 2-3/8-Inch Diameter and 74-Inch Spring Centers
- We carry beam trailer axles up to the 3500-lb rating and with the dimensions most commonly used on recreational trailers. Dexter idler axle kit # 35545I-EZ-89, for example, is a 3500-lb-rated EZ-Lube axle with 74-inch spring centers and an 89-inch hub face dimension. Axle diameter is 2-3/8-inches and spindle size is indeed 1-1/16-inch.
The same axle with spindles but without hubs is part # T3584F-EZ-8974.
The linked article on trailer suspensions includes a table of common axle dimensions...
view full answer... - Availability of Trailer Hitch Receiver for 2023 Hyundai Santa Fe
- We do have a hitch for your 2023 Hyundai Santa Fe. What you need is the etrailer Trailer Hitch Receiver # e28AR. This is a Class III hitch with a 2" receiver. It features black powder coat finish, bolt-on installation, and a lifetime warranty.
view full answer... - Available Trailer Hitch for a 2017 Hyundai Santa Fe Sport
- For your 2017 Hyundai Santa Fe Sport, I recommend the Curt Class III Trailer Hitch w/ 2 Inch Receiver, # C13152, and the Draw-Tite Class II Trailer Hitch w/ 1-1/4 Inch Receiver, # 36536, which is confirmed to fit your 2017 Santa Fe Sport.
Unfortunately, this hitch was not designed to be "concealed" once installed on the vehicle. The cross tube will be visible on the underside of the vehicle's bumper. Unfortunately, we do not have a concealed hitch to fit your Santa Fe.
This hitch is a...
view full answer... - Is There a Front Mount Hitch for a 2012 Hyundai Santa Fe
- To install a front hitch on your 2012 Hyundai Santa Fe you'll need to use a universal kit like the Curt Adjustable Trailer Hitch Receiver # C13701 since there are no custom fit options available. This hitch fits 18"-51" wide vehicle frames and features a 2" drop and a 2" receiver which fits basically anything you'll be putting at the front of your vehicle.
Aside from this you'll have to take your vehicle to a shop and have them custom fabricate something for your vehicle.
view full answer...
Go To Results